
Mud Watcher
Drilling fluid measurement is essential for safe and efficient rig operation. Manually collecting and testing mud samples is slow and time consuming for rig personnel. The Mud Watcher automatically measures the temperature, density, and viscosity of drilling fluid on the rig and send the data directly to the rig data acquisition system, mud logging unit, or dedicated data acquisition system. It is designed to be installed, operated autonomously, and maintained by the existing rig crew, with no specialized skills required. The Mud Watcher provides a steady stream of data, alerting mud engineers to possible problems much more quickly than conventional testing procedures. This reduces risk to personnel while providing accurate and timely measurements to enhance overall decision making, leading to higher efficieny, well quality, and productivity. For more information, check out the frequently asked questions. Features Continuous monitoring of drilling fluid density and viscosity. Density is displayed in customer selected units. Viscosity may be displayed as centipoise, centistokes, or funnel viscosity. Data is exported as an intrinsically safe analog signal to the rig data acquisition system, mud logging unit, or a dedicated data acquisition system. Provides an early indication of developing hole or drilling fluid changes that may be precursors to drilling problems Reduces rig crew exposure to noise and fumes within the shaker house Accurate, reliable, and easy to operate and maintain No requirement for dedicated / specialist service engineers. Operated and maintained by existing rig crews. Releases rig crews for more productive tasks Specifications Density Range: .9 - 2.64 sg (7.5 - 22 ppg) Viscosity: Native measurement in standard viscosity units (cP or Pa-s), can be converted to application specific Funnel Viscosity Seconds Viscosity Range: up to 20,000 cP (equivalent) Min/max ambient temperature: -4 to 203°F (-20 to 95°C) Electrical interface size: Intrinsically safe gland IP rating: IP 65 minimum for all parts Available signals: Temperature, Density and Viscosity, 4-20mA, Active, Powered Max suction pressure (lifting height): Dry 4m, Wet 8m Size: 68" × 29" × 29" (1735 × 720 × 720 mm) Weight: < 771 lb (350 kg) Requirements Electrical: 85 - 264 VAC, 2 Amp, 50/60 Hz Air: 100 psi (689.5 kPa) max at 20cfm / 40cuM/hr, 5 to 7 barG Part Number 350-00